Once RTOs receive registration, they must oversee many aspects such as annual declarations, AVETMISS reporting, and marketing compliance. Of all these duties, validation is frequently the most daunting.
We've covered validation in many articles, but it's worth re-examining. ASQA defines it as a quality review of the assessment procedure.
In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.
According to SRTOs 2015 Clause 1.8, RTOs must ensure that their assessment systems, including RPL, comply with training package requirements and adhere to the Principles of Assessment and Rules of Evidence.
The standards necessitate conducting two types of validation.
The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.
The next validation type confirms assessments are conducted following the principles of assessment and rules of evidence.
This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.
A Look at the Two Types of Assessment Validation
An Overview of Assessment Validation
As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.
Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.
On the other side, post-assessment validation pertains to the implementation, requiring Registered Training Organisations to adhere to the Principles of Assessment and Rules of Evidence.
This discussion will center around assessment tool validation.
How to Properly Conduct Assessment Tool Validation
Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.
Timing for Conducting Assessment Tool Validation
The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.
You don’t need to wait until your next 5-year validation schedule. Immediately validate new resources to ensure they’re ready for student use.
Nevertheless, this isn't the only occasion for this type of validation. Conduct assessment tool validation when you:
- when resources are updated
- when new training products are added on scope
- when course is reviewed against training product updates
- identifying your learning resources as a risk during your risk assessment
The risk-based regulatory approach of ASQA requires RTOs to perform regular risk assessments. Student complaints about learning resources indicate it's time for assessment tool validation.
Determining Training Products for Validation
Bear in mind, this validation is meant to ensure all learning resources are compliant before use. All RTOs are required to validate all unit resources.
Essential Resources for Assessment Tool Validation
Instructional Resources
To validate assessment tools, you need the complete suite of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.
Assessor guide/marking guide – ensure that instructions for assessors are sufficient and clear benchmarks for each assessment item are provided. Clear benchmarks are essential for reliable assessment outcomes.
Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.
Validation Board
Clause 1.11 details the requirements for validation panel members, noting that validation can be conducted by one or more people. Generally, RTOs require participation from all trainers and assessors and may include industry experts.
Your validation panel must, as a group, possess:
Current vocational competencies and relevant industry skills for the unit being validated
Current knowledge and expertise in vocational teaching and learning
Any one of the following training and assessment qualifications:
TAE40116 Certificate IV in Training and Assessment or its future version
Assessment validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.
ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.
We recommend using a more detailed template to examine each unit requirement and the assessment items that correspond to them. Here is an example:
Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Inspect?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Core Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?
Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?
Validity – Is the assessment testing what it is meant to test? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?
Basic Rules of Evidence
Validity – Does the evidence demonstrate that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to ensure the learner has the required skills and knowledge?
Authenticity – Is the assessment tool proving that the work is the candidate’s own?
Currency – Are the assessment tools reflective of current units of competency and contemporary industry practices?
Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.
To prevent using learning resources that overlook some unit requirements, make sure to follow these guidelines:
Follow Through with Actions
Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Complete each of the following actions at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:
change nappies
prepare bottle, bottle feed babies and clean equipment
prepare solid foods and feed babies
respond appropriately to baby signs and cues
prepare babies for sleep and soothe them
monitor and encourage suitable physical exploration and gross motor skills for the age
Having students explain the process of nappy changing for babies under 12 months doesn’t meet the unit requirement. Unless it’s meant to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.
Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.
Complete or Not Competent
Pay attention to lists. As noted earlier, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?
Every assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on student competence. Consequently, ensure your instructions are clear and not confusing for students or assessors. For example:
What kind of information can be included in a work package?
What kind of information can be included in a work package?
The answer could include:
Obligatory resources
Associated costs
Activity timeframe
Assigned roles and responsibilities
If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.
This is true for assessment items with double-barrelled questions check here or questions requiring more than one answer at the same time. These can confuse students and assessors, as shown in the sample question below:
Name a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers may include, but are not necessarily limited to:
Weather conditions – work area isolation, engineering controls, personal protective equipment
Work area and ground conditions – elimination, isolation, use of engineering controls
People – isolation, engineering, administration
Structural hazards – substituting, isolation, engineering
Chemical hazards – isolation, engineering controls, administration
Equipment or machinery – isolating, engineering, administration
Steering clear of double-barrelled questions makes it easier for students to respond and for assessors to judge student competence accurately.
Given these requirements, you might wonder, “Don’t learning resource developers offer audit guarantees?” But these guarantees require waiting for an audit before rectifying noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.